3. SETTING AFTER INSTALLATION
38
3.6 Satellite Setting
The three satellites are named APAC (Asia-pacific), EMEA (Europe-Middle east-Africa) and
AMER (America). To change satellite name, do as follows.
1. Click Satellite in the Basic settings sub menu.
2. Put the cursor in the Name box and enter the name of the satellite (max. 10 characters).
3. Click the Apply button to complete the setting.
The meaning of the table items is as follows.
• ID: Identification of the satellite
• Position: Position of the geostationary satellite (longitude)
• Primary: Frequency of the first global channel of the satellite
• Alternate: Frequency of the second global channel of the satellite
Satellite
To Next Page
