EasyManuals Logo

Furuno FELCOM 500 Operator's Manual

Furuno FELCOM 500
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #152 background imageLoading...
Page #152 background image
6. WEB FUNCTIONS
6-38
10. Left-click [Close]. A window similar to the one shown below is displayed.
11. Left-click the Properties button. A window similar to the one shown below is dis-
played.
12. Left-click the [Options] tab at the top of the [Properties] window.
Note: Only change the settings for [Idle time before hanging up] and [Time be-
tween redial attempts] in the [Redialing options] section of the window. Leave all
other settings at their default.
13. Adjust the [Time between redial attempts] to 2 minutes or more.
14. Adjust the [Idle time before hanging up] setting to [Never], then left-click the [OK]
button.
The [Idle time before hanging up] setting can be used to avoid unnecessary costs
due to lines left open. When the line is idle and the time set here lapses, the line
is automatically closed.
15. Close all open windows.
16. Check that the PPPoE connection icon appears under Broadband in the Network
Connections dialog box. You can open the data connection line with this icon.
Sample broadband connection status
Sample broadband connection properties

Table of Contents

Other manuals for Furuno FELCOM 500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Furuno FELCOM 500 and is the answer not in the manual?

Furuno FELCOM 500 Specifications

General IconGeneral
BrandFuruno
ModelFELCOM 500
CategoryMarine GPS System
LanguageEnglish

Related product manuals