Furuno FMD-3200 - How to Delete Objects from a User Chart; How to Copy a User Chart Object

10. USER CHARTS
10-8
3) Select [Insert Before] or [Insert After] to insert the point before or after the se-
lected point.
4) Change latitude and longitude position of new point if necessary.
5. Click the [Save] button to save, then click the [Close] button to close the dialog
box.
10.5 How to Delete Objects from a User Chart
1. Do steps 1 and 2 in section 10.3 to show the [User Chart] dialog box.
2. Click the [Select] button to open the [Select User Chart] dialog box.
3. Select the user chart that contains the object to delete, then click the [OK] button.
4. To the left of the [Object ] column, put a check mark next to the item to delete.
5. Click the [Delete] button.
Note: An object can also be deleted from the chart area. Right click the object to
delete, select [Delete] from the context-sensitive menu.
6. Click the [Save] button to save your edits and close the dialog box.
10.6 How to Copy a User Chart Object
You can copy a user chart object and add it to another user chart.
1. Do steps 1 and 2 in section 10.3 to show the [User Chart] dialog box.
2. Click the [Select] button to open the [User Chart Selection] dialog box.
3. Select the user chart to use, then click the [OK] button.
4. Follow steps 1-3 to select the chart where to copy the object.
5. Click the tab of the source user chart.
6. To the left of the [Object ] column, put a check mark next to the item to copy.
7. Click the [Copy] button.
8. Click the tab of the user chart where to copy the object.
9. Click the [Paste] button.
10. Click the [Save] button to finish and close the dialog box.