Furuno FMD-3200 - 1.10 How to Enter Ship Speed

1. INTRODUCTION
1-10
1.10 How to Enter Ship Speed
The speed can be entered from a log (STW) or GPS (SOG), or manually on the menu.
Note that FURUNO GPS Navigator GP-150 provides both COG and SOG.
1. Right-click anywhere in the [Own ship information] box to show the context-sensi-
tive menu.
2. Click [Open MENU].
3. Click [System Sensor Settings] or [Local System Settings] as applicable.
4. Click the [SPD] tab.
SPD page, local sensor
Open MENU
LOG/GPS
selection
Speed sensor list
Fill circle for manual speed input
Fill circle for automatic speed input
Stabilization
mode
Check to use radar as source for speed and course
Set course and speed of drift