2. OPERATION
2-44
If you press the STBY/TX key before the set time interval comes, the radar goes into
transmission.
Note 1: If an echo is detected entering the watch alarm area or the automatic acqui-
sition area echoes entering the watch alarm area or the automatic acquisition area,
the watchman will automatically turn off and the radar will transmit continuously.
Note 2: This function is not available when sub display (independent) is connected to
the radar sensor.
Do the following to activate the Watchman:
1. Press the MENU key to open the menu.
2. Press or to select [Alarm], then press the ENTER key.
3. Press or to select [Watchman], then press the ENTER key.
4. Press or to select [Off] or a time ([5min], [10min] or [20min]) then press the
ENTER key.
5. Press the MENU key to close the menu.
To turn the watchman feature off, select [Off] at step 4.
2.34 Alerts
2.34.1 What is an alert?
“Alert” is a generic name for a notice to any unusual or potentially dangerous situation
generated within the system.
For detailed information regarding alerts and alert IDs, see the "ALERT LIST".
2.34.2 Alert status window
The alert status window shows all currently violated alarms and system messages.
The alert status window is not automatically displayed when an alarm occurs.
1. Press the MENU key to open the menu.
2. Press or to select [Alert Settings], then press the ENTER key.
To Next Page
Loading...
Need help?
General
