1. OPERATIONAL OVERVIEW
1-5
1.5 Selecting a Display
Nine screen displays are available as shown figure in below.
1. Press the [DISP] key to show the DISPLAY MODE screen.
DISPLAY MODE
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
Display mode screen
2. Use the cursor pad or [ENTER] knob to select a mode.
To escape from the display mode screen without changing the display mode,
press the [DISP] key.
3. Press the [ENTER] knob to set the new display mode.
1.6 Soft Keys
The soft keys, their labels displayed at the bottom of the screen, provide for
one-touch execution of a desired function, and their label and function change
according to the display in use. When you turn on the power, the soft keys do not
appear. To show the soft keys, press any soft key. To access a soft key function,
press the appropriate soft key within five seconds after accessing them.
Soft keys
The soft keys disappear after five seconds. If you want to erase them earlier,
press the [CLEAR] key.
To Next Page
Loading...
