EasyManua.ls Logo

Furuno GP-7000 - Specifications of GPS Plotter;Sounder GP-7000; General Specifications; GPS Receiver Specifications; Display Unit Specifications

Furuno GP-7000
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SP - 1
E4429S01A
SPECIFICATIONS OF GPS PLOTTER/SOUNDER
GP-7000
1 GENERAL
1.1 Display 7-inch wide color LCD
1.2 Projection Mercator
1.3 Usable Area 80° latitude or below
1.4 Display Mode Plotter, Nav Data, Highway display, Compass display
1.5 Alarms Arrival and Anchor watch, Cross track error, Temperature,
Depth, Grounding, Ship’s speed alarms
2 GPS RECEIVER
2.1 Receiving Channels
GPS 12 channels parallel, 12 satellites tracking
WAAS 1 channel
2.2 Rx Frequency 1575.42 MHz
2.3 Rx Code C/A code, WAAS
2.4 Position Fixing System All in view, 8-state Kalman filter
2.5 Position Accuracy
GPS 10 m (95% of the time, HDOP 4)
WAAS 3 m (95% of the time)
2.6 Tracking Velocity 999 kt
2.7 Position-fixing Time Warm start: 12 s approx., Cold start: 90 s approx.
2.8 Position Update Interval 1 s
3 DISPLAY UNIT
3.1 Display Mode TFT color
3.2 Display Pixels 480 (W) x 234 (H) dots
4 PLOTTER FUNCTIONS
4.1 Effective Projection Area Depending on chart card in use
4.2 Track Display Plot interval: by time
(1 sec, 5 sec, 10 sec, 30 sec, 1 min, 5 min, 10 min, 30 min, 1 h)
or by distance (0.01, 0.05, 0.1, 0.5, 1.0, 2.0, 5.0, 10.0 nm)
4.3 Memory Capacity Track: 12000 points, waypoint: 2000 points
4.4 Storage Capacity Simple route: 200 routes with 35 waypoints each
4.5 MOB 1 point
4.6 Quick Routes 1 course

Table of Contents

Other manuals for Furuno GP-7000

Related product manuals