18
Global-Nickname tab
All equipment in the NavNet 3D system are assigned respective nicknames. If you don’t like the
preassigned nickname, you can change it here. Use the cursor pad to select location. Rotate the
RotoKey to select character and push it to confirm selection. Repeat this operation to complete
the nicknames.
24.Click the [Next] button.
Global-IP Camera tab
The IP cameras connected to the network are assigned a name (“IPcamera1 to 4”). If you don’t
like the preassigned name, you can change it here. Change the name using the cursor pad and
RotoKey as is the Global-Nickname tab.
25.Click the [Next] button.
To Next Page
Loading...
