Furuno MFDBB - Global-Data Source Tab

24
Global-Data Source tab
The Data Source dialog box shows the sources of various nav data. In case of multiple sensors
for a nav data item, for example, several position-fixing equipment, choose the sensor to use, with
the pull-down menu.
30.Click the [Next] button.
When the GP-330B or WS-200 is connected to the NMEA2000 network, go to the GPS Mode.
Set the WAAS, referring to the step 30. If not, go to step 31.
Item Description
Position & SOG/COG Choose the position-fixing sensor to use. (GP-320B, GP-310B, etc)
Heading Choose the heading sensor to use. (SC-30, PG-500, etc.)
Speed Through Water Choose the speed (STW) sensor to use. (DFF, etc.)
Water Depth Choose the depth sensor to use. (DFF, etc.)
Water Temperature Choose the temperature sensor to use. (DFF, etc.)
Wind Choose the wind sensor to use. (FI-303/501, WS-200, etc.)
Date & Time Choose the date and time source to use. (GP-320B, SC-30 etc.)
Roll and Pitch Choose the motion sensor to use. (SC-30, SC-50, etc.)
AIS Choose the AIS equipment to use. (FA-30/50/150 etc.)