5. CUSTOMIZING YOUR UNIT
5-9
5.3 Plotter Setup
This paragraph provides the information necessary for setting up the plotter
display.
5.3.1 Navigation options
Navigation options, for example, waypoint switching method, may be set on the
plotter setup menu.
1. Show the plotter display and press the [MENU] key open the main menu.
2. Press the PLOTTER SETUP soft key.
WAYPOINT SWITCHING
ARRVL ALM CRCL
COURSE VECTOR
LINE
SET GOTO METHOD
1POINT
QP
INTERNAL
PLOTTER
SETUP
EDIT
RETURN
D. BOX
Display option menu
Contents of display option menu
Item Description Settings Default Setting
Waypoints
Switching
Chooses waypoint switching method. See
“switching waypoints” on page 3-51.
Perpendicular, Arrvl
Alm Crcl, Manual
Arrvl Alm Crcl
Course Vector
You may extend a line from the own ship
position to show ship’s course. It may be a
vector (length depends on ship’s speed) or a
simple line (course bar)
Line, Vector, Off Line
Set GOTO
Method
Sets the method by which to navigate to a
quick point. See paragraph “3.10.1 Navigating
to a quick point.”
1 Point, 35 Points,
35 Pts/Port Service
1 Point
QP
To display destination waypoint from an
external navigation connected, select “EXT
WPT (RMB).”
EXT WPT (RMB),
INTERNAL
INTERNAL
D. BOX
(soft key)
Sets up data boxes. See paragraph 5.5.
To Next Page
Loading...
