Furuno NAVnet 1722 - Terminating Tracking of ARP Targets

2. RADAR OPERATION
2-38
2.25.4 Terminating tracking of ARP targets
When 10 targets have been acquired, no more targets may be acquired unless
targets are cancelled. If you need to acquire additional targets, you must first
cancel one or more individual targets, or all of the targets, using one of the
procedures below.
Terminating tracking of selected targets
1. Place the cursor on the target to terminate tracking.
2. Press the [CLEAR] key to erase to terminate tracking and erase the target.
Terminating tracking of all targets
1. Press the [MENU] key followed by the ARP SETUP soft key.
2. Select CANCEL ALL TARGETS.
3. Press the EDIT soft key.
CANCEL ALL TARGETS
▲
¤
▼
¡
YES
NO
Cancel all targets window
4. Select YES.
5. Press the ENTER soft key.
6. Press the [MENU] key to close the menu.