Furuno NAVpilot-511 - Desktop Mounting (FAP-5001 Only); Control Unit, Desktop Mounting

1. INSTALLATION OF UNITS
1-3
1.1.2 Desktop mounting (FAP-5001 only)
Use the optional brackets to mount the control unit FAP-5001 on a desktop or the overhead.
Name: Bracket
Type: FP64-01011
Code No.: 009-000-330
Name Type Code No. Qty
Hanger 64-024-1502 100-305-820 1
Knob 02-139-1032 100-298-472 2
Bracket 03-153-1155 100-288-890 2
Pan head screw M4x10 000-881-964 4
Tapping screw 5x20 000-802-081 4
1. Fix the hanger to the mounting location with four tapping screws (supplied with option).
2. Attach two brackets to the back of the control unit with four pan head screws (supplied
with option).
3. Screw knob bolts in brackets, set unit to hanger, and tighten knob bolts.
4. Attach hard cover to protect the LCD.
Control unit, desktop mounting