EasyManua.ls Logo

Furuno SCX-20 - Appendix 1 Menu Tree

Furuno SCX-20
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AP-1
APPENDIX 1 MENU TREE
This appendix covers the SCX-20 menu, accessible from compatible equipment. For the SC set-
ting tool menu tree, see the operator’s manual for the SC setting tool (OME-72851). Contact our
dealer for details.
GNSS Setup
Sensor
Ship Size,
ANT /
CALC-SPD
Position
Disable SV
Offset
DR Time DR Time (1m to 5m) [ ]
Ship’s Width (1.0m to 999.9m; 3.0m) [ ]
Ship’s Length (1.0m to 999.9m; 10.0m) [ ]
Ship’s Height (1.0m to 199.9m; 5.0m) [ ]
Continued on the following page
ANT Position X0 (-327.64m to +327.64m; 0.00m) [ ]
ANT Position Y0 (0.0m to 999.9m; 5.0m) [ ]
ANT Position Z0 (0.0m to 199.9m; 2.5m) [ ]
CALC-SPD-POSN Y1(BOW) (0.0m to 999.9m)
[ ]
CALC-SPD-POSN Y2(Stern) (0.0m to 999.9m; 10.0m)
[ ]
CALC-SPD-POSN Z(Height) (0.0m to 199.9m)
[ ]
Smoothing
QZSS All (YES, NO) [ ]
QZSS
HDG (-180.0° to 180.0°; 0.0°) [ ]
Pitch (-10.0° to 10.0°; 0.0°) [ ]
Roll (-10.0° to 10.0°; 0.0°) [ ]
SOG/3-Axis Speed (-12.5% to 12.5%; 0.0%) [ ]
Air Pressure (-99.9hPa to 99.9hPa; 0.0hPa) [ ]
Air Temperature (-99.9°C to 99.9°C; 0.0°C) [ ]
SOG/COG (0s to 9999s; 5s) [ ]
3-Axis Speed (0s to 9999s; 5s) [ ]
ROT (0s to 30s; 2s) [ ]
GPS All (YES, NO) [ ]
GLONASS All (YES, NO) [ ]
GLONASS
Galileo All (YES, NO) [ ]
Galileo
SV ELEV (5 to 90) [ ]
SBAS SBAS Mode (On, Off) [ ]
SBAS Search (Auto, Manual) [ ]
SBAS Satellite Selection (120 to 138) [ ]
Disable SBAS
GPS
QZSS 1 (0 to 197) [ ]
QZSS 2 (0 to 197) [ ]
QZSS 3 (0 to 197) [ ]
GPS 1 (0 to 32) [ ]
GPS 2 (0 to 32) [ ]
GPS 3 (0 to 32) [ ]
GLONASS 1 (0 to 24) [ ]
GLONASS 2 (0 to 24) [ ]
GLONASS 3 (0 to 24) [ ]
Galileo 1 (0 to 36) [ ]
Galileo 2 (0 to 36) [ ]
Galileo 3 (0 to 36) [ ]
SBAS 1 (Off, 120 to 138) [ ]
SBAS 2 (Off, 120 to 138) [ ]
SBAS 3 (Off, 120 to 138) [ ]
Note 1
: Record user settings inside the brackets
[ ])
that follow menu items.
Note 2: Default settings are shown in BOLD.
Compatible equipment’s
menu

Table of Contents

Related product manuals