Furuno SCX-20 - Page 37

APPENDIX 1 MENU TREE
AP-3
Simple
Diagnostic
Test
Advanced
Diagnostic
Test
Reset
Setting
Continued from the previous page
ROM (OK, NG) [ ]
RAM (OK, NG) [ ]
ROM (OK, NG) [ ]
RAM (OK, NG) [ ]
Rate Gyro Test (OK, NG) [ ]
Accelerometer Test (OK, NG) [ ]
Rate Gyro Status (Good, Bad) [ ]
Accelerometer Status (Good, Bad) [ ]
Magnetic Sensor Status (Good, Bad) [ ]
GNSS 1 Status (Good, Bad) [ ]
GNSS 1 RAM Test (OK, NG) [ ]
GNSS 2 RAM Test (OK, NG) [ ]
GNSS 1 ROM Test (OK, NG) [ ]
GNSS 2 ROM Test (OK, NG) [ ]
GNSS 3 RAM Test (OK, NG) [ ]
GNSS 3 ROM Test (OK, NG) [ ]
GNSS 4 RAM Test (OK, NG) [ ]
GNSS 4 ROM Test (OK, NG) [ ]
Menu Settings (YES, NO) [ ]
Factory Reset (YES, NO) [ ]
System Restart (YES, NO) [ ]Restart
GNSS 2 Status (Good, Bad) [ ]
GNSS 3 Status (Good, Bad) [ ]
GNSS 4 Status (Good, Bad) [ ]
Antenna 1 Status (Good, Bad) [ ]
Antenna 2 Status (Good, Bad) [ ]
Antenna 3 Status (Good, Bad) [ ]
Antenna 4 Status (Good, Bad) [ ]
Press./Temp. Sensor Status (Good, Bad) [ ]
Installation Status (0 to 99) [ ]