Furuno TZT14 Installation Manual

52 pages

To Next Page

www.furuno.com

All brand and product names are trademarks, registered trademarks or service marks of their respective holders.

Installation Manual

Multi Function Display

Model TZT9/TZT14

SAFETY INSTRUCTIONS ................................................................................................ i

SYSTEM CONFIGURATION ........................................................................................... ii

EQUIPMENT LISTS........................................................................................................ iii

1. MOUNTING..............................................................................................................1-1

1.1 Mounting Considerations ...................................................................................................1-1

1.2 Flush Mounting ..................................................................................................................1-2

1.3 Desktop Mounting ..............................................................................................................1-4

2. WIRING....................................................................................................................2-1

2.1 Wiring Instructions .............................................................................................................2-1

2.2 CAN bus/NMEA0183 Data Conversion and CAN bus Bridging.........................................2-8

2.3 Example NavNet TZtouch System Configurations...........................................................2-11

3. SETTING UP THE EQUIPMENT .............................................................................3-1

3.1 How to Set Time Zone, Language and Units.....................................................................3-3

3.2 Menu Initial Setup ..............................................................................................................3-5

3.3 How to Set up the Radar....................................................................................................3-8

3.4 How to Set up the Sounder..............................................................................................3-11

3.5 Wireless LAN Setting .......................................................................................................3-13

PACKING LISTS ......................................................................................................... A-1

OUTLINE DRAWINGS ................................................................................................ D-1

INTERCONNECTION DIAGRAM ................................................................................ S-1

Other manuals for Furuno TZT14

Operator's Manual253 pages

User Handbook16 pages

Questions and Answers:

J
John LambSep 3, 2025
How to fix poor discrimination in range on Furuno Marine Equipment?
- R
  Robert Gonzalez MDSep 3, 2025
  To improve range discrimination on your Furuno Marine Equipment, adjust the sea control.
J
Jennifer FriedmanSep 2, 2025
What to do if you changed the range, but the radar picture does not change on Furuno Marine Equipment?
- J
  Justin RuizSep 2, 2025
  If you change the range on your Furuno Marine Equipment and the radar picture does not change, try zooming in or out on the radar display. If that doesn't work, turn the power off and on.
B
Beth SotoAug 23, 2025
What to do if nothing appears on the screen after pressing the key and selecting [Tx Radar] from the RotoKey menu to transmit on Furuno Marine Equipment?
- T
  tracy95Aug 25, 2025
  If nothing appears on the screen after selecting [Tx Radar] from the RotoKey menu to transmit, try the following: * Select [Tx Radar] from the RotoKey menu again. * Check that the antenna cable is securely fastened. * Verify that the radar source is correctly selected.
P
Patricia GonzalesAug 31, 2025
How to fix for TZTBB Furuno Marine Equipment when nothing appears on the screen after you press the key?
- B
  Brenda CaldwellSep 1, 2025
  If nothing appears on the screen of your TZTBB Furuno Marine Equipment after pressing a key, check if the monitor is powered on and ensure the monitor cable is properly connected.
M
Mark WilliamsAug 30, 2025
What to do if marks and characters appear, but no picture appears on Furuno Marine Equipment?
- M
  mcdonaldseanAug 30, 2025
  If marks and characters appear on your Furuno Marine Equipment but no picture is visible, check that the transducer cable is connected.
D
David CampbellAug 30, 2025
What to do if marks and characters appear, but echoes do not appear on Furuno Marine Equipment?
- B
  Bruce GillAug 30, 2025
  If marks and characters appear on your Furuno Marine Equipment, but echoes do not, check that the antenna cable is fastened.
P
Patricia WelchAug 29, 2025
Why is the track of my ship not plotted on Furuno Marine Equipment?
- T
  Timothy JonesAug 29, 2025
  If the track of your ship is not being plotted on your Furuno Marine Equipment, ensure that the track is turned on. Also, select the [Overlay] - [Tracks] menu from the RotoKey menu.
K
kristinpetersonAug 28, 2025
What to do if you selected a fish finder display at the display selection window, but no picture appears on Furuno Marine Equipment?
- T
  timothy00Aug 28, 2025
  If you've selected a fish finder display but no picture appears, check the following: * Ensure the signal cable for the fish finder is securely fastened. * Verify the fish finder source is correct. * Confirm that the network fish finder is properly connected.
A
Andrew GarciaAug 27, 2025
Why is position not fixed on Furuno Marine Equipment?
- L
  Lisa GregoryAug 27, 2025
  If your Furuno Marine Equipment position is not fixed, check that the antenna connector is fastened and that the navigator is correctly connected.
R
Rebecca DixonAug 27, 2025
What to do if there is no response when a key is pressed on Furuno Marine Equipment?
- B
  Bethany RoachAug 27, 2025
  If there is no response when a key is pressed on your Furuno Marine Equipment, turn the power off and on. If the problem persists, the key may be damaged; contact your dealer for instructions.

Furuno TZT14 Specifications

General

Resolution	1280 x 800 pixels
Display Type	LCD
Brightness	1000 cd/m²
Touchscreen	Yes
Waterproof Rating	IP56
Operating Temperature	-15°C to +55°C
Power Supply	12-24 VDC
Weight	3.5 kg
Display Size	14.1 inches