Fusion MS-IP700 - Page 45

44
MS-IP700 model
Note: If you select iPod or USB input without first inserting the
device, the message “Not connected” is displayed on the screen.
Before inserting iPod
To avoid damage and ensure safe operation, please read the following
information before using your iPod.
• PleaseensureiPoddockconnectorisclean,dryandfreefromdamage.
• Checkthattheunit’siPoddockisfreefromobstructions.
• InsertcorrectsleevecombinationtomatchyouriPod(neverinsertiPod
withoutthecorrectsleeve).
• EnsureiPodisinsertedwithdisplayfacingupwards.
• NeverforceyouriPodintothedock,iftheiPoddoesnotmatewith
reasonable ease, the sleeve/iPod combination is most likely incorrect.
• TakecarewhenremovingiPodfromunitassurfacesmaybewarm.
To insert your iPod or USB flash drive:
1. Press the door catch and open the control panel door.
Press the
door catch
Open