Fusion MS-IP700 - Page 46

45
2. Insert your USB flash drive onto the USB socket or insert your iPod in its
sleeve(seeiPodcompatibilitysheetsuppliedseparately)).Makesurethat
the device is firmly pushed onto the connector socket.
3. Close the control panel door firmly.
4. Selectinputfromthedevice,asrequired.
MS-AV700 model
To connect your iPod, you will need:
• Portablemediadevicedock(MS-DKIPUSB),or
• AppleSyncCable.
To connect your USB flash drive, you will need:
• Portablemediadevicedock(MS-DKIPUSB),or
• USBcable(theUSBcableontheMS-AV700unitmustbeaccessible).
Note: If you select iPod or USB input without first connecting the
device, the message “Not connected” is displayed on the screen.