Menu No. of the function indicated
by the cursor is displayed.
When the cursor is in a position without
a function assigned, OFF is displayed.
The screen above is an example
of the LEVEL2 MENU1 menu.
39
Function Map
(Function Set-up Screen)
Example of menu LEVEL2
Call the menu screen by
button up, down, left, or
right operation.
press the button to re-
turn to the Start Screen
Pres
(Opening Screen)
press the
button to re-
turn to the Start Screen
The screen on the right
shows an example of setting
EPA function.
Call the setup screen by
pressing the
button.
Menu Screen
The menu screen displays 18 items on 3 rows and 6 lines on one page and displays up to
36 items on 2 pages designated MENU1 and MENU2.
A menu screen matched to the
purpose can also be created
by using the menu customize
functions described on page
40. The menu No. of the func-
tion indicated by the cursor is
displayed at the top right-hand
corner of the screen. When a
function is not assigned, OF is
displayed at the top right-hand
corner of the screen.
Calling the setup screen
On the menu screen, select the
function by moving the cursor by
button up, down, left, or right
operation.
The highlighted item is the cur-
rently selected function.
Pres
To Next Page
Loading...
