FUTABA 4PK 2.4GHZ User Manual

ｎ
Warning
ｎ
Caution
ｊ
When using the T4PK in the high speed (HIGH SPEED) mode, always use it under the following
conditions:
Servos :6V Futaba digital servo (including BLS Series brushless servos)
Receiver’s battery :6V Ni-Cd battery
Transmitter mode :HIGH SPEED mode (See p.46 for setting method.)
Under other conditions, the set will not operate, or the specified performance will not be displayed even if it operates.
In addition, it may cause servo trouble. Futaba will not be responsible for damage, etc. caused by combination with the
products of other companies.
In addition, the FSU1 Fail Safe Unit cannot be used because the system is different. Use the fail safe function of the
transmitter.
ｊ
When using analog servos, always switch the T4PK servo response to the NORMAL mode.
Transmitter mode :NORMAL mode (See p.46 for setting method.)
Receiver’s battery :6V Ni-Cd battery
The set cannot operate in the HIGH SPEED mode. Operation in this mode will cause trouble of servo and other equipments.
Digital servos (including BLS Series brushless servos) can also be used in the NORMAL mode.
8
For Your Safety As Well As That Of Others
For Your Safety As Well As That Of Others
Use this product in a safe manner. Please observe the following safety precautions at all
times.
Explanation of Symbols
The parts of this manual indicated by the following symbols are extremely important
and must be observed.
ｎ
Danger
Indicates procedures which may lead to dangerous situations and could
cause death or serious injury as well as superficial injury and physical
damage.
Indicates procedures that may not cause serious injury, but could lead to
physical damage.
Symbols:
ｌ
: Prohibited
ｊ
: Mandatory
Indicates a procedure which could lead to a dangerous situation and may
cause death or serious injury if ignored and not performed properly.
ｎ
Warning
ｎ
Caution
Symbols Explanation
2.4GHz System Precautions
ｊ
Special attention should be paid before turning on the system while other cars are running or
other airplanes are flying because the 2.4GHz RC system could potentially affect them.
ｊ
Be sure to set the Fail Safe function.
High Speed Mode Precautions

FUTABA 4PK 2.4GHZ Specifications

General

Frequency	2.4GHz
Channels	4
Modulation	FHSS
Display	LCD
Telemetry	Yes
Model Memory	40 models
Battery Type	NiMH
Weight	Approx. 700g (without battery)