V
FUTABA 9Z
THE UNOFFICIAL WORKSHOP MANUAL
WARNING: THE INFORMATION IN THIS MANUAL IS FOR INFORMATION PURPOSES ONLY AND MAY BE INCORRECT, CAUSE DAMAGE
TO YOUR RADIO OR INJURY TO YOURSELF AND OTHERS. IF YOU USE THIS MANUAL YOU DO SO SOLEY AT YOUR OWN RISK.
www.jamesandtracy.co.uk
Copyright 2012 jamesandtracy.co.uk
Page 32 of 84
Figure 25 Removing the top PCB of the LCD Assembly
Figure 26 Top PCB 'Flipped' and Battery Terminals Exposed
8. Desolder and remove the old battery terminals using your iron and pump, being
careful to note which terminal is +ve and which is –ve (see Figure 26)
9. Double check you are going to place your new battery the right way round and, once
you are sure, solder it in.
To Next Page
Loading...
