34
DISPLAY (display setting of GPB-1)
Set the contrast and brightness of the screen of the GPB-1 and the lighting time of the
backlight.
: :
(1) CONTRAST
Move the cursor to "CONTRAST" with the [
/
+] or [
/
-] key and press the [Enter] key to enter the setting
mode. Adjust the contrast with the [
/
+] and [
/
-] keys.
When you finish adjusting, press [Enter] key to exit
setting mode.
Setting ranges: 0 ~ 20 Initial value: 10
(2) BRIGHTNESS
Move the cursor to "BRIGHTNESS" with the [ /+] or [ /-] key and press the [Enter] key
to enter the setting mode. Adjust the brightness with the [
/+] and [ /-] keys.
When you finish adjusting, press [Enter] key to exit setting mode.
Setting ranges: OFF (Backlight off ) / 0 ~ 20 Initial value: 10
(3) OFF TIMER
Adjust the time until the backlight turns off after the last key operation.
Move the cursor to "OFF TIMER" with the [
/+] or [ /-] key and press the [Enter] key
to enter the setting mode. Use the [
/+] and [ /-] keys to adjust the lighting time of the
backlight.
When you finish adjusting, press [Enter] key to exit setting mode.
Setting ranges: OFF (Always on ) / 0 ~ 240 sec Initial value: 10 sec
DISPLAY screen
To Next Page
Loading...
