80
(6) RESET : FLT tune data reset
This resets the "FLT.Tun" setting back to the defaults. Move the cursor to
"RESET" by pressing the [
/+] or [ /-] key, and press the [Enter] key to
enter the reset mode. With "EXECUTE: Enter (1
sec)" displayed, press
and hold the [Enter] key for about 1
second to initialize "FLT.Tun" setting.
If you do not wish to reset, press [Enter] key or [Esc/Page] key to exit the
reset mode.
Go to the menu title of FLT. EXPERT screen 1/2
To Next Page
Loading...
