FUTABA FX-36 - Page 113

113
＜ Linkagemenu ＞
TelemetryAlarmDurationandRepeattime
The repeat time and duration time for the telemetry alarm (buzzer, vibration and speech) can be set.
Durationisnotdisplayedwhen
RepeatisINH.
Alarm
output
Durationtime5s
Repeattime8s
OFF OFF OFFON ON ON
e.g.Repeattimeis8secondsandDurationtimeis5seconds.
žŧƘƕƄƗƌƒƑŃƄƑƇŃŵƈƓƈƄƗŃƗƌƐƈŃƉƒƕŃŷƈƏƈƐƈƗƕƜŃŤƏƄƕƐƀ
ŏ Tap the [Telemetry Setting] button in the Linkage
menu to call the setup screen shown below.
Duration
Itisanalarmoutputtime.
Settingrange：1s 〜30s
Initialvalue：INH
Durationvaluehastobelessthan
repeatvalue.
Durationtimeisextendedwhenthe
otheralarmeventoccurs.
Repeat
Itisarepeattimeofanalarm
output.
Settingrange：INH，1s 〜240s
Initialvalue：INH