FUTABA FX-36 - Page 117

117
＜ Linkagemenu ＞
Warningsetting
Mixing warning normal reset
The warning display at power ON can be turned
ON/OFF for each function. Use by setting functions
which may be dangerous if operated at power ON
to ON. Initial setting is all ON (Buzzer).
ŏ Tap the [Warning setting] button in the
Linkage menu to call the setup screen
shown below.
Thesettingscanbechanged
individually.Whensetto
[Inhibit],awarningisnot
displayedatpowerON.
Type1
Type2
Type3
"Vibrator"type
Ifthefollowingtypesareselected,thetransmitter
willvibrateduringthewarning.
ŏReturn to
Linkage menu
WARNING
 Itisextremelydangerousto
unnecessarilyinhibitessential
warnings.
■Carelessspinningofpropellersorrotorsposesa
dangerofseriousinjuryordeath.