FUTABA FX-36 - Page 175

175
＜ Data ＞
Point addition method
Point deletion method
Point curves or spline curves of up to 11/17 points
can be used. (Initial value: 7/9 points) The set
points can be freely increased, decreased, and
offset.
1.Open the screen of a mixing curve with the
curve function.
2. Tap the [Remove] button. (The selected
point becomes an outlined point Ō )
3. Use the move between points button [ł ]
or [ń ].
*The point is deleted.
2.Tap the "Position" button.
3. Tap the "ʈʈ" "ʈ" "ʆ" "ʆʆ" button and
select the position (mark Ō) you want to
add.
1. Use the move between points button [ł ]
or [ń ]
and select the point. (The red point ʄ is the
selected point.)
4. When the "Add" is tapped, the point is
added.
（
Ō
）
ń
（
ʄ
）
*A new point is created.
5. Press "Rate" and use the up/down arrows to
adjust the rate points up or down.
Theredpoint
（■）
moves(togreenpoint)
Movebetween
point
Thekindofmixingcurve
Aredmark
（ □ ）
movesfreely