FUTABA FX-36 - Page 176

176
＜ Data ＞
Curve setting operation Spline curve
A smoother curve is made.
Setting method is same at spline and point.
Splinecurve
Thekindofmixingcurve
Point Spline
Up to 11 or 17 points curve can be used.
(differs with function)
Initial point number: 9 points (17 points
curve), 7 points (11 points curve)
*The set points can be freely increased, decreased, and
offset.
[Rate adjustment of each point]
2. Tap to the [Rate]
item. And set the rate
using the "ʈʈ" "ʈ"
"ʆ" "ʆʆ" buttons
Repeat steps 1 through 2 and adjust the
curve.
Point curve (Point) adjustment
(Point)
*[Separ.] mode: Normal setting
*[Comb.] mode: Creates a left and right
symmetrical curve.
1. Tap to the item
and select the point whose
rate you want to set.
*The mark on the curve shows
the currently selected point.
Up to 11 or 17 points curve can be
used. (differs with function)
Initial point number: 9 points (17
points curve), 7 points (11 points
curve)