FUTABA FX-36 - Page 38

38
＜ BeforeUse ＞
ŶőťŸŶŒŶőťŸŶŕŃƇƈƙƌƆƈŃƖƈƗƗƌƑƊ
S.%8S/S.%8S2 servos or a telemetry sensor can be connected directly to the FX-36. Channel setting and
other data can be entered for the S.%8S/S.%8S2 servos or sensors.
6%866%86VHUYR
6%866%86
GHYLFH
7HOHPHWU\VHQVRU
);
1. CRnnect the 6.%86 GeYice yRX Zant tR set
Zith as shRZn in the ÀJXre.
. 7Xrn Rn the transPitter pRZer.
. Call the setXp screen.
6erYR 6ysteP 0enX
→
6.%86 serYR
6ensRr /inNaJe 0enX
→
6ensRr
. 3erIRrP settinJ in accRrGance Zith each
screen.
. 7his sets the channel an
G Rther Gata IRr each
6.%86 serYR Rr telePetry GeYice tR be XseG
Zith the 6.%86 GeYice Rr receiYer.
*It is not necessary to carry out multiple battery
connections like a TM=/T4SG.
*:hen connecting many current-consuming
servos please use an additional power supply
hub.
And electric power is supplied to a servo with
another power supply.
%DWWHU\
+XE +XE
+XE
ق$QRWKHUSRZHUVXSSO\ك
+XE
ق$QRWKHUSRZHUVXSSO\ك
6%866HUYR
●Whenseparatepowersupplyused
When a large number of servos are used or
when high current servos are used, the servos
can be driven using a separate Power Supply
3-way hub.
Used when using a separate
power supply battery.
6ZLWFK
Green
WARNING
DonotusetheS.I/F(S.BUSservosetup)connector
withanythingotherthanhigh-voltage-capable
S.BUSservos.
■ Transmitterbatteryvoltage(6.6V)isconveyed
directly.
Usinganythingotherthanhigh-voltage-
capableservospresentsthedangerthatthey
willbreak.
WARNING
DonotdisconnectorturntransmitterpowerOFF
whileS.BUSservoandtelemetrysensordatais
beingsaved.
■ S.BUSservoandsensorsavedatawillbelost,
resultinginmalfunction.