FUTABA T18SZ Manual

2
T18SZ Model Data Converter
1. Preparation
1.1. Please make sure that a card reader is attached to a PC prior to inserting a memory
card.
1.2. After ensuring that the memory card of the original transmitter contains the model
to be converted, place the memory card in the card reader which is attached to
your PC. You can utilize the same memory card to save the data.
1.3. Please run the Model Data Converter. To do so, click the Model Data Converter
executable.
SD
card
SD
card
T18SZ SD card,
insert to your PC
T14SG or T18MZ SD card,
insert to your PC
Data
conversion is
done by your PC
T18SZ Model Data Converter
Install
http://www.futabarc.com/software-updates.html

FUTABA T18SZ Specifications

General

Channels	18
Frequency	2.4GHz
Telemetry	Yes
Modulation	FASSTest, FASST, S-FHSS, T-FHSS
Display	Color LCD
Model Memory	30