6. Dispose the contents of the potty in the
washroom and properly sanitize the potty
assembly before placing the potty back into the
potty receiver.
Note: If the user wants to use the commode with a toilet
instead of with the potty then one has to remove
the potty receiver and potty. First one has to
remove the commode seat as describe in the
section REPLACING SEAT ASSEMBLY and then
remove the potty receiver and potty. Finally after
using the toilet the commode should be cleaned
and inspected to see if there may be human waste
on other parts of the commode. Then the potty
receiver and potty can be placed back onto the
commode if needed.
Installing Potty
1. Turn the commode around so that one can see
the back of the commode and potty.
2. Ensure the wheel or caster locks are engaged
before installing potty.
3. Open one side of the Velcro potty strap located
on the potty receiver.
4. Remove the lid on the potty (if any) and ensure
To Next Page
Loading...