To Next Page
V
Vincent WallAug 1, 2025
Why does my Future Capella feel loose?
- RRoger BishopAug 1, 2025
If your Future Wheelchair feels loose, inspect all nuts and bolts to ensure they are properly tightened.
Why does my Future Capella feel loose?
If your Future Wheelchair feels loose, inspect all nuts and bolts to ensure they are properly tightened.
What to do if Future Wheelchair veers to the side?
If your Future Wheelchair veers to the right or left, check that the rear wheels are equally spaced away from the seat frame. Also, check the angle adjustable caster assembly.
Why does my Future Capella Wheelchair veer to the right or left?
If your Future Wheelchair veers to the right or left, check the angle adjustable caster assembly.
How to stop Future Capella wheels from drifting?
To correct drifting wheels on your Future Wheelchair, check the angle adjustable caster assembly.
What to do if my Future Capella feels loose?
If your Future Wheelchair feels loose, a good first step is to check all nuts and bolts. Make sure they are properly tightened.
What causes a Future Capella Wheelchair to veer right or left?
If your Future Wheelchair veers to the right or left, check the angle adjustable caster assembly. Also check that rear wheels are equally spaced away from seat frame.
Guidance on selecting the appropriate wheelchair based on user needs and environment.
Emphasizes the importance of regularly reading and following the manual's instructions.
Defines the term "WARNING" as hazards that may cause severe injury or death.
Warns against exceeding the specified weight limit to prevent damage or injury.
Advises against using the chair for weight training if total weight exceeds limits.
Stresses the importance of familiarizing oneself with the chair's handling before use.
Provides crucial safety tips for operating the wheelchair safely and effectively.
Outlines essential pre-use checks to ensure the wheelchair is safe and functional.
Details suitable surfaces for operation and warns against unsuitable terrain.
Explains how center of gravity affects stability and tip-over risk.
Warns against performing wheelies due to the high risk of falls or tip-overs.
Advises caution when moving backward, as the chair is most stable moving forward.
Warns about reaching or leaning, which can affect balance and cause falls or tip-overs.
Provides safety guidelines for operating on ramps and slopes, emphasizing stability.
Provides safety information and procedures for transferring the user.
Provides safety precautions for attendants when tilting the wheelchair.
Step-by-step guide for attendants on safely descending curbs with the wheelchair.
Instructions for attendants on safely helping a rider climb curbs.
Critical instructions for attendants on safely moving the wheelchair down stairs.
Explains the function and proper use of anti-tip wheels for preventing tip-overs.
Warns against using armrests for lifting the chair.
Advises caution when folding back canes to avoid pinching fingers.
Warns about using correct fasteners and proper tightening to ensure chair integrity.
Details warnings about footrest usage, weight bearing, and potential tip hazards.
Provides critical safety information on the proper and improper use of positioning belts.
Emphasizes the importance of ensuring quick-release axles are locked to prevent falls.
Information regarding the rear wheel axles.
Explains the function of wheel locks and warns against using them to slow down the chair.
Instructions for installing, adjusting, and removing T-style pin release armrests.
Instructions for installing, adjusting, and removing T-style knob release armrests.
Guide to engaging, disengaging, and adjusting flip-back armrests.
Instructions for installing, removing, and adjusting center pivot swingaway footrests.
Guide for installing, removing, and adjusting pin style swingaway footrests.
Steps for installing, removing, and adjusting dual swingaway footrests.
Instructions on installing, removing, and adjusting dual elevating legrests.
Procedures for replacing, installing, and adjusting caster fork units.
Details on adjusting the angle of the caster fork assembly.
Covers checking, installing, removing, and adjusting quick-release rear wheel axles.
A chart detailing front seat to floor height and corresponding rear axle positions.
Instructions for adjusting the seat depth of the wheelchair.
Steps for correctly installing the seat cushion.
Guide on how to adjust the height of the rear wheel axle mount.
Instructions for adjusting the horizontal position of the rear wheel bracket.
Explains how moving axles affects weight distribution and stability.
Procedure for installing rear anti-tip components onto the wheelchair frame.
How to adjust the height of the rear anti-tip wheels for proper ground clearance.
Instructions on how to flip the anti-tip mechanism up and down.
Steps for adjusting the angle of the backrest for optimal positioning.
How to fold the backrest down and lock it back into position.
How to adjust the angle of the stroller handle using push buttons.
Process for adjusting the backrest recline using a trigger handle.
Operation of the tilt mechanism using the trigger handle.
How attendants can use the foot pedal to operate the tilt mechanism.
Instructions for adjusting and operating manual wheel locks.
Guide for adjusting and operating Berner model wheel locks.
Details on adjusting and operating Berner attendant wheel locks.
Steps to adjust the width of the lower frame of the wheelchair.
Procedure for adjusting the width of the seat frame.
How to adjust the width of the H-Links at the front and rear.
A checklist for regular safety inspections of the wheelchair components.
General checks for wheelchair operation and alignment.
Inspection points for the wheelchair's frame and cross tubes.
Checks related to the function and engagement of wheel locks.
Inspection points for the seat and backrest condition and hardware.
Guidance on inspecting tires for wear, cracks, and damage.
Checks for rear wheel quick-release axles, spokes, and side movement.
Inspection of handrims for wear and damage.
Inspection and adjustment of front casters and forks for proper function.
Brief mention of cleaning upholstery and armrests.
Information on how to obtain service and repairs for the wheelchair.
Detailed instructions for cleaning the seat, back, and upholstery.
Recommendations for cleaning and protecting the painted surfaces of the wheelchair.
Instructions for weekly cleaning of axles and moving parts.
Details the lifetime warranty coverage for the wheelchair frame and cross brace.
Outlines the two-year warranty for back, cushions, and other components.
Specifies the 90-day warranty for cushion and back upholstery.
Lists what is not covered by the warranty and conditions for voiding it.
Explains the process for obtaining warranty service and repairs.
General| Brand | Future |
|---|---|
| Model | Capella |
| Category | Wheelchair |
| Language | English |