WC CAPELLA ENGLISH CDN 540 REV10.DOCX 17 CAPELLA
9 WHEELCHAIR SET-UP AND ADJUSTMENTS
HEIGHT ADJ. T-STYLE PIN RELEASE ARM
1. Installation
a. Slide the main arm post into the receiver mounted to the seat frame tube.
b. The armrest will automatically lock into place, engaging the release lever.
2. Height Adjustment
a. Pull the release pin lever to the outward position.
b. Slide armrest pad up or down to desired height.
c. Return release pin to the locked position against armpost.
d. Push arm pad until upper armpost locks firmly into place.
3. Removing Armrest
a. Press the release lever to disengage and remove the armrest.
4. Frame Adjustment Position
a. Remove armrest from chair.
b. Remove the two screws holding the receiver in place.
c. Move the receiver to the required position.
d. Replace the two screws holding the receiver.
e. Re-install the armrest into the receiver.
To Next Page
Loading...