1 GENERAL
590 REV02 REV DATE: SEPTEMBER 13, 2013 9 AQUA NT
Safety Inspection Checklist
Initial adjustments should be made to suit your personal body structure needs and preference. Thereafter follow
these maintenance procedures:
GENERAL
Commode rolls straight (no excessive
drag or pull to one side)
FRAME AND CROSSING TUBES
Inspect for loose or missing hardware
Inspect for bent frame or cross tubes
SEAT AND BACK
Inspect for rips or sagging
Inspect for loose or broken hardware
Inspect cane and back support for
wear/looseness
FRONT AND REAR CASTERS
Inspect caster assembly for proper
tension by spinning caster; caster should
come to a gradual stop