anti-tippers are an option on this commode (you may order
with or without the anti-tippers), Future Mobility Healthcare
Inc. strongly recommends ordering the anti-tippers as a
safeguard for the commode user.
Anti-tippers MUST be fully engaged and snap clips fully
protruding out of adjustment holes.
Ensure both anti-tippers are adjusted to the same mounting
hole.
Installing Anti-Tippers
1. Insert the Anti-Tip assembly into the bottom of the
commode frame where the caster position is for the
attendant propelled commode.
2. Line up the hole in the back of the frame with one of
the holes on the anti-tip assembly.
3. Measure the distance between the bottom of the anti-
tipper wheels and the ground/floor.
4. If the distance between the bottom of the anti-tipper
wheels and the ground/floor is not 1 ½ “ to 2”, adjust
the location of the anti-tippers and line up another
hole on the anti-tip assembly with the hole in the back
of the frame.
5. When the proper location of the anti-tip assembly is
To Next Page
Loading...