4. Operating System and Equipment
AUTO Mode
*
When AUTO button is pressed, the button light
is on, the A/C system enters full automatic
operation mode, and the following items are
controlled automatically as per the set value:
• Air vent temperature
• Air speed at the air outlet
• Air vent mode
● Air circulation mode
● Working conditions of A/C
● Working conditions of anion purifier*
Press the AUTO button again to light off the
button light. A/C system exits full automatic
operation mode.
Air Circulation
Press
button to make air circulation mode
switch between interior circulation and exterior
circulation.
– Interior air circulation: By pressing
button,
the button light goes on and the system enters
interior air circulation mode. In this mode:
• The outside air can be prevented from
entering the car to make the interior air
circulate.
• The exhaust of other vehicles or other dirty air
can be prevented from entering the car.
• In AUTO control mode in summer, interior air
circulation mode will be selected to strengthen
the refrigeration effect*.
- Exterior air circulation: Press
button to
light off the button light. Air circulation enters
exterior air circulation mode. When this mode
is available:
● The outside air will be introduced into the car
to keep fresh interior air.
Caution
• Prolonged interior air circulation will cause
accumulation of carbon dioxide in the car, and
it is not conducive to keep the driver awake.
• Using the interior air circulation mode in cold
or rainy weather is easy to cause fogging of
window, to affect the driver’s vision.
To Next Page
Loading...
