5. Driving Guide
5.1.4 Engine Stop
Vehicle Models with Manual Transmission
– Depress the brake pedal and clutch pedal to
stop the vehicle steadily, and apply parking
brake.
– Switch the shift lever to neutral gear.
– Loosen the brake pedal and the clutch pedal,
twist the mechanical key to switch the ignition
switch to "LOCK" or press the start switch to
shut down the engine.
– Turn the steering wheel back and forth, and
engage the steering wheel lock mechanism
(apply to models with Ignition switch).
Vehicle Models with Automatic Transmission
– Push the brake pedal, stop the vehicle, and
apply the parking brake.
– Put the shift lever at “P” gear.
– Loosen the brake pedal, twist the mechanical
key to switch the ignition switch to "LOCK" or
press the start switch to shut down the engine.
– Turn the steering wheel back and forth, and
engage the steering wheel lock mechanism
(apply to models with Ignition switch).
Hint
The radiator fan may still run for some time
after the engine is shut down.
Caution
● In the process of vehicle driving, in case of
emergency which requires shutting down the
engine, press Start switch for long time or
press Start switch three times continuously.
The Start switch will be withdrawn from "ON"
to "ACC" gear. Shut down the engine. Then,
emergency flameout is completed. The engine
can be restarted a few of seconds after
emergency flameout.
• During driving, in case of automatic engine
shutdown or emergency flameout, put the
transmission shift lever at the “N” position and
press the Start switch again to restart the
engine.
● If brake signal failure occurs to the engine
during the startup process, it must first switch
to the "ACC" gear and then press the Start
switch to start the engine. In the startup
process, the shift lever must be in the "P" or
"N" gear.
To Next Page
Loading...
