5. Driving Guide
5.4.2 Rev
ersing Rear-view System *
The reversing rear-view system can provide
130° wide-angle video coverage, display a wide
range of rear view by video on the audio system
display to help the driver see the complex road
conditions behind the car in all directions,
enhancing the reversing safety.
Warning
The reversing rear-view system does not
take the place of the driver’s observation to the
surrounding environment, so that the driver
shall focus attention on parking safely and
adjusting parking position according to actual
conditions.
Start and
Stop of the Reversing Rear-View
System
When the Start switch or the ignition switch is
at "ON" position, with the shift lever in gear "R”, the
reversing rear-view system works automatically;
the audio system screen displays the rear view,
and shows the reference distance line.
Switching the shift lever from “R” position can
make the reversing rear-view system exit
automatically, and the audio system will stop
displaying reversing image.
Reference Distance Line
The lines
in three colors on the display
represent the reference horizontal distance
between the line position and the rear bumper.
Red line: 0.1~0.5m
Yellow line: 0.5~1m
Blue line: 1~3m
Hint
If the driver turns the steering wheel during
reversing, the reversing image will show
corresponding steering assist line.
To Next Page
Loading...
