6. Usage and Maintenance
6.4.4
Windshield
Was
hing Liq
uid and Wiper
Blade
Adding Windshield Washer Fluid
Windshield cleaning
device will have its
washing liquid supplied by the washing fluid tank in
the engine compartment. Each time when the
washing liquid is checked, if the washing liquid
level is found to be too low, timely add washing
liquid into the washing liquid tank.
Pure water is difficult to completely clean the
windshield, so washing liquid additive accepted by
GAC MOTOR must be added into the pure water;
please prepare the washing liquid according to the
proportion specified in the outer packing of additive.
Warning
• Be sure to operate inside the engine
compartment with extra care.
•
The engine compartment is a high-risk
area. Before opening the engine hood,
please carefully read and comply with
relevant warnings and instructions.
● Windshield washing liquid shall not be
added
with coolant or any other additive
.
Otherwise, oil stain may remain on the
windshield when cleaning, which may
seriously influence the forward visibility,
and is very easy to cause accident.
Caution
Do not mix the windshield washer fluid with
other cleaning agents. Doing so may cause the
washer fluid to be decomposed, blocking the
windshield washer nozzle.
To Next Page
Loading...
