GAC GA4 - Engine Start

5. Driving Guide
5.1.3 Engine Start
Vehicle Mod
els with Manual Transmission
Vehicle Models with Ignition Switch
– Insert the mechanical key into the Ignition
switch.
– Make sure that the shift lever is at neutral gear.
– Turn the mechanical key to switch the Ignition
switch to “START” gear to start the engine.
Vehicle Models with Start Switch
– Carry the smart key into the car.
– Depress the brake pedal and maintain it at the
full range, and make sure the Start switch
indicator light is green.
– Make sure that the shift lever is at neutral gear.
– Press the Start switch to start the engine.
Hint
To ensure safety, when a car with manual
transmission is started, it is recommended that the
clutch pedal and brake pedal be depressed
simultaneously.
Vehicle Models with Automatic Transmission
Vehicle Models with Ignition Switch
– Insert the mechanical key into the Ignition
switch.
– Depress the brake pedal and maintain it at the
full range, and make sure the shift lever is at
“P” or “N” gear.
– Turn the mechanical key to switch the Ignition
switch to “START” gear to start the engine.
Vehicle Models with Start Switch
– Carry the smart key into the car.
– Depress the brake pedal and maintain it at the
full range, and make sure the shift lever is at
“P” or “N” gear and the start switch indicator
light is green.
– Press the Start switch to start the engine.
Hint
• If the engine is of cold start, it needs idle
running to let it warm up before driving. At the
same time, because valve lifter takes a few of
seconds to reach normal working pressure, it
can produce running noise, which is normal
phenomenon, requiring no worry.
● If models with start switch cannot start the
engine normally caused by brake signal,
speed failure, or low temperature in winter and
other reasons, it can try to switch the start
switch to the "ACC" gear, ensure the
transmission shift lever in "P" or "N” gear, and
press start switch for 15 seconds, and then
start the engine forcefully.
212