5. Driving Guide
When
the automatic transmission shift lever is
in the “P” or “N” gear position and the brake pedal
is pressed, the Start switch indicator light turns
green. At this time, press the Start switch to switch
to the “START” gear.
START: Switch indicator light is green and the
engine is started. Release the Start switch and
brake pedal after starting the engine, the Start
switch will switch to "ON" position automatically.
Hint
For models with manual transmission, it is
recommended to operate the Start switch when the
manual transmission shift lever is in neutral
position.
Limp Home Mode
In case
the engine cannot be started due to
power shortage of smart remote key, place the
smart remote key on the marked key position on
the bottom of armrest box horizontally, press the
Start switch to switch to “ACC” or “ON” position,
and then tread on the brake pedal, the indicator
light of Start switch will turn green; press the Start
switch again to start the engine.
Hint
• In case of power shortage of smart key, press
the Start switch, the instrument cluster display
will indicate "No Key Detected".
• This start method is temporary emergency
startup. Please replace the battery of smart
key as soon as possible.
To Next Page
Loading...
