GAC GA4 - Panorama Parking System

5. Driving Guide
5.4.3 Panorama P
arking System *
The panorama parking system can provide the
information of environment around the vehicle to
the driver through real-time image, reduce the blind
zones of driving, and forecast the movement track
of the vehicle in combination with steering wheel
angle and vehicle dimensions and other related
parameters; adding such information into the
panoramic image can make the driver fully
understand the traveling direction of the vehicle
and judge whether the reversing is safe.
The panorama parking system consists of a
control host module and four 180º cameras.
Images in the front, rear, left, and right directions
relative to the vehicle are captured, spliced into the
360º bird’s view through the image processing
algorithm, and displayed on the display of the audio
system.
Start and Stop of the Panorama Parking System
Panoramic parking system can be turned on/
off by the following two modes of operation:
1. Start and stop through shift lever.
When the Start or Ignition switch is at “ON”
position:
– Place the shift lever on “R” gear, the
panorama parking system will automatically
start;
– With the shift lever moved out of “R” gear
and no operation performed by the driver, the
panorama parking system will exit
automatically after displaying for 30s.
2. Start and stop through button.
When the Start or Ignition switch is at “ON”
position:
– Short press the button
, the button
light will be on and the panorama parking
system will start.
– Short press the button
again, the button
light will be off and the panorama parking
system will stop.
253