GAC GA4 - Seat Belt

3. Safety Operating Instructions
17
3.2.2 Seat
Belt
Seat Belt Indicator Light
Driv
er seat belt indicator light
If the driver h
as not
worn the seat belt with the
Start or Ignition switch at the “ON” position, the
driver seat belt telltale on the instrument cluster
illuminates and text appears to remind the driver to
wear the seat belt.
Front passenger seat belt indicator light*
If
the front p
assenger has not yet worn the
seat belt with the Start or Ignition switch at the “ON”
position, the front passenger seat belt telltale on
the instrument cluster illuminates and text appears
to remind the front passenger to wear the seat belt.
Caution
Before starting driving, check the front seat
and make sure there is no heavy on the seat to
prevent the system from mistaking that there is
occupant on it and giving a false alarm.
When the Start switch or ignition switch is at
"ON" position and the vehicle speed is less than
20km/h, if the driver or front passenger does not
fasten his/her seat belt*, the corresponding
indicator light on the instrument cluster will flash
about 6 seconds and then stay on.
Caution
When the seat belt device fails, the indicator
light will also flash about 6s and then stay on.
Please go to your GAC MOTOR dealer for
maintenance.
When
the Start or Ignition switch is at "ON"
position and the vehicle speed is not lower than
20km/h, if the driver or the front passenger does
not fasten the seat belt*, the corresponding
indicator light on the instrument cluster will flash
about 20 seconds and then stay on, and the beeper
also sounds until the seal belt is fastened.
Caution
When the seat belt device fails, the indicator
light will also flash about 20s and then stay on, and
the beeper also sounds. Please go to your GAC
MOTOR dealer for maintenance.