3. Safety Operating Instructions
18
Seat Belt Preten
sioner E
quipment
The configur
ation of seat belt pretensioner
equipment may vary with different vehicle models.
– The seat belt restrains the driver and
passengers to sit in a suitable position,
preventing the body over tilting forward
before
the collision.
– The seat belt pretensioners will be activated
by the electronic control unit in the event of a
severe collision, and then the pretensioner will
drive the seatbelt webbing tighten by
immediate p
ulling back.
– In the event of collision, the driver's body will
move forward then the seat belt pretensioners
activate, to make the restraining force to the
body at a certain range, preventing a further
injury towards the driver; at the same time, the
seat belt pretensioners activate in conjunction
with the airbag to provide an optimal protection.
Hint
• When being initiated, the pretensioner
equipment releases little harmless smoke and
generates sound, which is normal.
•
fter collision, initiated pretensioner equipment
cannot be reused, and the airbag indicator
light
is continuously on. Please contact
GAC MOTOR dealer for replacement.
Wear F
ront
Seat Belts
– Properly adj
ust the front seat. => Refer to
Page 116
– Properly adjust the headrest. => Refer to Page
114
– Gradually draw the seat belt out at constant
speed, and draw it over your shoulder and hip.
Insert the latch plate into the corresponding
buckle until you hear a clic
k.
–
Then, pull the shoulder part of the belt upward
parallel to your upper body. Strain the hip part
of the belt and make sure that the latch plate is
locked securely.
To Next Page
Loading...
