3. Safety Operating Instructions
19
Wear
Rear Seat Belts
–
Properly adjust the headrest. => Refer to
Page
114
–
Gradually draw the seat belt out at consta
nt
spe
ed, and draw it over your shoulder and
hip.
Insert
the latch plate into the corresponding
buckle until you hear a clic
k.
–
Then, pull the shoulder part of the belt upward
parallel to your upper body. Strain the hip part
of the belt and make sure that the latch plate is
locked securely.
Unbuckle the Seat Belt
–
When the red PRESS button near the
buckle
is
pushed, the latch plate pops up
automatically.
–
Hold the latch plate and return the seat belt to
allow the retractor to retract the
belt.
Adjust Seat
Belt Height
–
Pull the belt guide part ① outward and move
it
upward/d
ownward to adjust the seat belt to the
desired height
.
–
Release the seat belt guide
part.
–
After the completion of adjustment, tug on
the
belt
to make sure the guide part is se
curely
locked.
To Next Page
Loading...
