4. Operating System and Equipment
Adjust
ment of Card Sequence
- Slide
on the opposite angles of the display
towards the middle with thumb and forefinger
at the same time to enter the adjustment mode
of card sequence.
- Long press the card to drag the card to adjust
the card sequence.
- After the adjustment of the sequence, click
[OK] to save.
- If do not need to save, click [Cancel] to exit.
Button Mode
On the main interface of card mode, short press
MENU on the control panel or click
or soft
button to switch the card mode to the button mode.
– The
functions in button mode include CarLife,
picture, video, setting and T-BOX*.
- Click the soft buttons of corresponding
functions to let the system switch to the
corresponding functional interface.
To Next Page
Loading...
