GAC GA4 - Page 205

4. Operating System and Equipment
Light Contro
l
Click “Lighting Control” soft button to enter the
lighting control setting interface (slide left/right to
switch interfaces), which can set “auto light
sensitivity*, atmosphere light control*, follow me
home, and daytime running light*” functions.
Auto Lighting Sensitiv
ity*
- Click the soft button to set as "low", "medium"
and "high".
- After restoring factory settings, it defaults to be
"medium".
Follow
Me Home
- Click the soft button to set as “OFF”, “low
beam only” and “low beam + rear fog”.
- After restoring factory settings, it defaults to be
“low beam only”.
Atmosphere Light Control*
- Click
soft button to set the function on/off.
– After restoring factory settings, it defaults to be
“On”.
Daytime Running Light*
- Click
soft button to set the function on/off.
– After restoring factory settings, it defaults to be
“On”.
A/C Setting*
Interior/Exterior Circulati
on Smart Control*
- Click
soft button to set the function on/off.
- After restoring factory settings, it defaults to be
“Off”.
A/C Comfort Curve*
- Click the soft button to set as "soft", "normal"
and "fast".
- After restoring factory settings, it defaults to be
"normal".
199