5. Driving Guide
"P” Gear (Pa
rking Gear):
Switch to this gear when the vehicle has parked
steadily in general.
– Press the unlock button at the front end of the
shift lever to switch the shift lever to the “P”
gear.
– When withdrawing from the "P" gear, you need
to press the unlock button at the front end of
the handle and push the brake pedal .
Hint
• Only when the car is completely still can the
"P" gear be engaged.
• You must ensure that the engine has been
started and the brake pedal has been pushed
to bottom before switching from "P" gear to the
other gears.
"R" Gear (Re
verse Gear) :
Switch to this gear when reversing:
– Depress the brake pedal to stop the vehicle
steadily.
– Press the unlock button at the front end of the
shift lever, put the shift lever to "R" gear. At
this time, the reversing light will automatically
light up, and the reversing system will
automatically start. => Refer to Page 309
– Release the brake pedal and depress the
accelerator pedal slowly to reverse the car.
Caution
Before switching to "R" gear, make sure that
the vehicle is completely stopped and that the
engine speed cannot be too high. Otherwise, the
transmission can be damaged or even an accident
may occur.
“N” Gear (Neutral Gear):
You can directly put the shift lever from "R" or
"D" to “N” gear.
Caution
Please depress the brake pedal and do not
depress the accelerator before withdrawing the
shift lever out from the "N" gear.
Warning
When driving, do not switch to "N" gear to
slide. Otherwise, it can easily cause driving
hazards.
To Next Page
Loading...
