6. Usage and Maintenance
After maintaining the car b
ody surfa
c
e,
the wax
remaining on the glass shall be removed by special
cleanser and cleaning cloth. So as to prevent
scratching the windscreen wiper.
Remove the snow on the windows and
rearview mirrors with a bristle brush.
Remove ice using the special deicing spray.
You can also remove the ice using the scraper with
extra care to avoid damage to the components. Be
sure to scrape the ice in the same direction.
Caution
• Do not scrape the ice back and forth.
• Do not use warm or hot water to remo
ve the
ice and snow on the windows and rear-view
mirrors. Doing so may crack the glass.
Cleaning the Front Wiper
Blades
- Switch the Start or Ignition switch
to “ON” gear,
and then to “OFF” gear.
– Within 10s after finishing the last step, move
the combination switch of wiper to gear, then
the wiper arm will move for half circle.
- Lift the wiper arm and carefully remove the
dust and dirt from the wiper blade with a soft
cloth.
- Carefully lower the wiper arm back to the
windshield when the cleaning is finished.
-
Switch the Start or Ignition switch to “ON” gear
again, making the wiper arm back to its
origin
al position automatic
ally.
To Next Page
Loading...
