EasyManua.ls Logo

GAC GA4 - Page 283

GAC GA4
365 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Usage and Maintenance
- Screw out
the engine oil filler cap
anticlockwise.
- Fill engine oil into the filler repeatedly by small
amount, and check the engine oil level after
each filling.
- When the oil level is close to the upper limit
mark, i.e. the engine oil is sufficient, stop
adding oil, assemble the filler cap and tighten
clockwise.
Warning
Engine oil is a type of highly combustible
material. Be careful to add the engine oil
and do not sprinkle the engine oil onto the
scorching hot engine parts or exhaust
system piping.
If too much engine oil is filled, please do
not start the engine, and contact GAC
MOTOR dealer for treatment. Otherwise,
the three-way catalytic converter may be
damaged.
A
fter completing the filling, the engine oil
filler cap must always be tightened, so as
to prevent the engine oil from spilling when
the engine is operating and avoid fire.
Replace Engine Oil
Repl
ace the engine oil as per the intervals
specified in the Warranty Manual. Replace the
engine oil at GAC MOTOR dealer.
If the vehicle is used under severe conditions,
or fuel oil with higher sulfur content is used, or
short-distance traveling frequently occurs, or the
vehicle will idle for a long time (e.g. taxi), or the
vehicle will travel in high dust area, or the vehicle
will frequently travel with drawbar trailer, or the
vehicle will be used in high and cold area, increase
the number of maintenance times or reduce the
maintenance period of several maintenance items
between periodic maintenances.
277

Table of Contents

Related product manuals