6. Usage and Maintenance
5. Remove the rear
fog light bulb ① from the rear
fog light holder.
6.
Generally, perform the installation in the
reverse order of removal procedures
Replacing High brake light
High brake light consists of LED bulb. It's not
allowed to replace any single set of LEDs. Replace
the high brake light assembly if necessary.
In case of any failure of the high brake light,
please have your vehicle checked and repaired at
GAC MOTOR dealer as soon as possible.
Replacing Number Plate Light Bulb
1. Switch off the Start
or Ignition switch.
2. Unscrew the fixing screws (see the arrows) of
the number plate light assembly and take out
the assembly ①
.
To Next Page
