6. Usage and Maintenance
Replacing Vanit
y Mirror Light Bulb*
1. Switch
off the Start or Ignition switch.
2. Open the vanity mirror.
3. Carefully pry out the vanity mirror light housing
① at the position of the arrow.
4. Take
out the vanity mirror light bulb ②.
5. Generally, perform the installation in the
reverse order of removal procedures
Replacing Glove Box Light
1. Switch
off the Start or Ignition switch.
2. Open the glove box.
3. Pry up the fixing clip (see the arrow) of the
glove box light and remove the glove box light
①.
To Next Page
